Paradyne Hotwire 6321/6322 IDSL Router, Руководство пользователя

Страница: 18 / 71

Accessing the DSL Router
2-4
6371-A2-GB20-00 March 2000
9. At the prompt, enter the new Administrator-level password to replace abc123:
password admin
new password and press Enter
save
and press Enter
NOTE:
Any input during an Administrator configuration session must be saved
while still in configuration mode.
For more information regarding the system identity, refer to Determining the
Current Access Level, below.
If you are denied access during a Telnet session, the session stops and an error
is logged. If you accessing the DSL router locally and a Telnet session is active,
you will receive a message:
Local console disabled by conflict
Telnet Access
The Telnet access defaults to Administrator level. If the login is at the Operator
level, then Operator level access is available. Telnet access is always enabled.
Determining the Current Access Level
To determine the local console access level, log in to the DSL router. The
command line prompt following the login displays the access level. The default
System identity is
CUSTOMER>
.
If the prompt format
appears as . . . Then the DSL router
access level is . . .
And if you entered a System
identity of Paradyne, the
prompt displays . . .
CUSTOMER> Operator, display mode Paradyne>
CUSTOMER #> Administrator, display
mode Paradyne #>
CUSTOMER – CONFIG#> Administrator,
configuration mode Paradyne – CONFIG#>
Determining the Available Commands
To determine the commands available at the current login access level, enter:
H
help
or
H
? (question mark)