Paradyne Hotwire
6301, Руководство по установке

Страница: 14 / 24

14
Configuration Setup
The Console connection is optional, used to locally configure the router. Refer to Step 5
on page 9 of Installing the Hotwire 6301/6302 IDSL Router for details.
The Console cable is connected to a VT100-compatible terminal or a PC running a
terminal emulation program. Verify the terminal settings:
„
Data rate is set to 19.2 kbps (19200 bps).
„
Character length is set to 8.
„
Parity is set to None.
„
Stop bits is set to 1.
„
Flow control is set to Off or None.
Accessing the Router
When the local console connection is first established, access control to the IDSL router
displays an initial prompt of
Login>
.
Procedure
1. At the initial prompt of
Login>
, enter the factory default Login ID of
paradyne
.
2. At the
password>
prompt, enter the factory default Password of
abc123
.
3. At the next prompt for System ID, the factory default is
CUSTOMER>
. Type
show
system
to display hardware/firmware information and Selftest Results.
Refer to the Hotwire DSL Routers User's Guide for configuration settings and command
line entries.
Increasing the Number of End-User Systems
The router can support differing numbers of end-user systems, depending on the
functions that are enabled and traffic loading. Typical configurations provide support for
up to 32, 64, or 256 hosts (end-user systems).
The number of end-user systems can be increased by using subnets for static
addressing, or by using Dynamic Host Configuration Protocol (DHCP) for dynamic
addressing.
Increasing the number of PCs may require cable changes. Refer to Cables and
Connectors on page 15. Refer to the Hotwire DSL Routers User's Guide for
configuration settings and command line entries.