Hotwire 6210, 6211, and 6381 User’s Guide
11. In the
Internet Protocol (TCP/IP) Properties
dialog box, click in the radio button labeled
Use the
following IP address
and type
192.168.1.
x
(where
x
is any number between 3 and 254) in the IP
Address field. Type
255.255.255.0
in the Subnet Mask field.
12. Click on
twice to confirm and save your changes, and then close the
Control Panel
.
3.2.4
Windows Me:
1.
In the Windows task bar, click on the
Start
button, point to
Settings
, and then click on
Control Panel
.
2.
Double-click on the
Network and Dial-up Connections
icon.
3.
In the
Network and Dial-up Connections
window, right-click on the
Network
icon, and then select
Properties
.
The
Network Properties
dialog box is displayed with a list of currently installed network components.
If the list includes
Internet Protocol (TCP/IP)
, the protocol has already been enabled, in which case
you can skip to Step 11.
4.
If
Internet Protocol (TCP/IP)
does not appear as an installed component, click on
.
5.
In the
Select Network Component Type
dialog box, select
Protocol
, and then click on
.
6.
Select
Microsoft
in the Manufacturers box.
7.
Select
Internet Protocol (TCP/IP)
in the Network Protocols list, and then click on
.
You may be prompted to install files from your Windows Me installation CD or other media. Follow the
instructions to install the files.
8.
If prompted, click on
to restart your computer with the new settings.
9.
After restarting your PC, double-click on the
Network and Dial-up Connections
icon in the
Control
Panel
.
10.
In
Network and Dial-up Connections
window, right-click on the
Network
icon, and then select
Properties
.
11.
In the
Network Properties
dialog box, select
TCP/IP
, and then click on
.
12.
In the
TCP/IP Settings
dialog box, click in the radio button labeled
Use the following IP address
and
type
192.168.1.
x
(where
x
is any number between 3 and 254) in the IP Address field. Type
255.255.255.0
in the Subnet Mask field.
13.
Click on
twice to confirm and save your changes, and then close the
Control Panel
.
3.2.5
Windows 95, 98:
1.
In the Windows task bar, click on the
Start
button, point to
Settings
, and then click on
Control Panel
.
2.
Double-click on the
Network
icon.
The
Network
dialog box is displayed with a list of currently installed network components. If the list
includes
TCP/IP
, the protocol has already been enabled, in which case you can skip to Step 9.
3.
If
TCP/IP
does not appear as an installed component, click on
. The
Select Network
Component Type
dialog box appears.
4.
Select
Protocol
, and then click
.
The
Select Network Protocol
dialog box appears.
18 April 2004 6210-A2-GB21-00