10
4. Insert the power cord’s round end into the jack labeled POWER. If you do not have
Model 5546-A1-200, proceed to Step 6.
For Model 5546-A1-200 only, place the ferrite choke on the Power cable as closely
as possible to the RTU. Pass the Power cable through the ferrite choke twice,
creating a loop as shown.
98-16130
5. Close the two halves around the cable and snap the ferrite choke shut. Press
down on the plastic latch to secure the ferrite choke in place around the cable.
98-15610-01
POWER
CONSOLE
DSL
Hotwire 5546 RTU
Power
Jack
Transformer
DTE
Required
on
Some Models
6. Plug the transformer into an AC outlet. The RTU hardware setup is now complete.
NOTE:
Use only the transformer provided with this product.
