Using the HotWire Diagnostics Utility
3-11
5100-A2-GB22-10
April 1997
Downloading Firmware
Use the following procedure to download firmware updates from a disk or virtual
hard drive.
Procedure
To download firmware:
1. Select Download Firmware from the
Configuration menu on the Diagnostics
Utility main menu.
The Open window appears. This window
uses standard Windows user interface
conventions. Notice
that the Open window
may look slightly
different on a Windows
for Workgroups 3.11
system.
2. Select the appropriate
drive (for example,
drive a:) as shown on
the sample Open
window. (It is
recommended that you
copy the update file to your hard drive and then download. Downloading from
the a: drive is significantly slower than downloading from the hard drive.)
3. Select the file.
4. Click on one of the following:
— OK to accept the parameters and return to the main menu.
— Cancel to close the window without downloading firmware and return to
the main menu.
Exiting the Utility
To quit the Diagnostics Utility, select Exit from the File menu.
