Paradyne FrameSaver SLV NNI, Руководство по установке

Страница: 11 / 20

11
Entering Trap Managers
Worksheet: SNMP Traps Options
Now that the FrameSaver NNI unit is connected to the network, SNMP Trap Managers
can be configured.
To enter SNMP managers:
1. Select SNMP Traps configuration options.
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
SNMP Traps
2. Minimally, enter at least one trap manager – the central site’s NMS trap manager:
— SNMP Traps set to Enable
— Number of Trap Managers
— NMS n IP Address (n being the first, second, third, etc. trap manager entered)
3. Press Ctrl-a to move the cursor to the bottom of the screen.
4. Type s (Save) and press Enter. The Save Configuration To: prompt appears.
5. Select Current Configuration and press Enter.
6. Press Esc three times to return to the Main Menu.
Helpful Hint:
You can press Ctrl-a, type m and press Enter to return to the Main Menu, or
you can press the Esc key until the Main Menu appears.
Proceed to
Setting Up a Management PVC to the NOC
on page 12.