14
Connecting to the Ethernet
1. Insert one 8-pin connector of the Ethernet cable into the Ethernet port.
2. Insert the other end of the cable into the Ethernet interface of the LAN where the
NMS resides.
P
O
R
T
COM
NET
POWER
ETHERNET
00-16687
NMS
LAN
3. Check Health and Status messages in the left column of the System and Test
Status screen to verify that there are no Ethernet-related Health and Status
messages.
Main Menu
→
Status
→
System and Test Status
If the
Ethernet Link Down
message appears, make sure both ends of the
Ethernet cable are properly seated.
