Paradyne COMSPHERE 3920PLUS Series, Техническое справочное руководство

Страница: 222 / 356

Dial Access Security
12-15 3920-A2-GH30-40 October 1998
Table 12-4
(2 of 3)
Security Configuration Options
DTE_PW_TermChar: 013
Nxt
"
013
This configuration option does not appear if Answer Security Mode is configured for No_Answ_Sec.
DTE Password Termination Character. Allows you to change the ASCII character used to indicate the end of a password
or User ID entered by an originating user. This character can be set to any ASCII value except those representing
alphanumeric characters (A–Z, a–z, and 0–9). See Appendix E,
ASCII Character Table .
DTE_PW_BkSpChar: 008
Nxt
"
008
This configuration option does not appear if Answer Security Mode is configured for No_Answ_Sec.
DTE Password Backspace Character. Sets the character that is used to perform a backspace in security mode. This
character can be set to any ASCII value except those representing alphanumeric characters (A–Z, a–z, and 0–9). See
Appendix E,
ASCII Character Table .
Get_User_ID: Disable
Nxt Disable Enable
This configuration option does not appear if Answer Security Mode is configured for No_Answ_Sec.
Get User ID. (Only applicable when using network management.) This configuration option is used for security auditing
only and is not part of the modem’s normal security verification process.
Disable – The remote user is not prompted for a User ID.
Enable – The remote user is prompted for a User ID once the handshaking and error control negotiation (if applicable)
are complete.
NMS_Reporting: 00
Nxt
"
00
This configuration option does not appear if Answer Security Mode is configured for No_Answ_Sec.
NMS Reporting. (Only applicable when using network management.) Determines how, and if, security event information
is reported to the 6700 Series NMS. This information can be collected to build an audit trail of successful and
unsuccessful connections.
Values for this configuration option range from 00 –15.
NOTE: If not using the 6700 Series NMS or if using 6800 Series NMS, this configuration option should remain at its
default setting of 00.
Answ_Secur_Mode: No_Answ_Sec
Nxt No_Answ_Sec DTE_Only VF_&_DTE
Answer Access Security Mode. This configuration option is read-only and cannot be changed from the Configuration
branch. The setting of this option can only be changed in the Set Answer Sec group found in the Security branch.
No Answer Security – Disables the dial access security feature.
DTE Only – The answering modem is enabled for security. The originating user must supply a password when
prompted.
VF & DTE – The answering modem is enabled for security. The modems negotiate security using the VF-side password
entry technique protocol. If successful, and the Password Type for this particular VF password is set for VF_&_DTE, a
password is requested from the originating user. If successful, the modems connect and can pass data.
NOTE: The settings of this configuration option determine the type of access security protection provided by the
modem. It can be disabled using the No_Answ_Sec setting, or it can be enabled with the DTE_Only or
VF_&_DTE settings.