manualshive.com logo in svg

Paradyne Comsphere 3511, Руководство пользователя

Поделиться
Скачать
Paradyne Comsphere 3511 Скачать руководство пользователя страница 25

Operation

3-3

3510-A2-GN32-70

July 1999

Table 3-1

(2 of 3)

3500 Series Indicators and Switches

Name

Function

Definition

PASS

Pass

This green indicator lights if the DSU has
completed a device test without a failure. The
indicator remains on until another key is
pressed.

FAIL/STR/DSBL
(3510)

Dsbl/Fail (3511)

Failure/Error/Streaming/Disable

This red indicator performs four functions:

FAIL/Dsbl (3510/3511) – Indicator lights at
the end of a Device Test if the test was not
successful. The indicator remains ON until
another key is pressed.

Fail (3511) – This indicator rapid flashes
during Test Pattern when errors are detected.

DSBL (3510) – Indicator lights if the DSU has
been disabled.

STR (3510) – Indicator slow flashes when a
streaming terminal alarm condition exists.
( NOTE: The RTS indicator will also be  ON.)

TP

Test Pattern

This yellow indicator lights when the test pattern
generator/comparator circuit is active. Press the
TP pushbutton switch to generate a local test
pattern.

LL

Local Loopback

This yellow indicator lights when the DSU is in
local loopback. Press the LL pushbutton switch
to initiate a local loopback test.

DL

Digital Loopback

This yellow indicator lights when the DSU is
performing a digital loopback or a channel
loopback. Press the DL pushbutton switch to
initiate a local digital or channel loopback test.

RL

Remote Loopback

This yellow indicator lights when a remote digital
loopback has been requested of the remote
DSU. Press the RL pushbutton switch to initiate
a digital loopback test at the remote end.

TXD (103)

2

Transmit Data

This green indicator is steady-ON when MARKS
are transmitted, goes Off when spaces are
transmitted, and flashes at a steady rate when
variable data are transmitted.

RXD (104)

2

Receive Data

This green indicator is steady-ON when marks
are being received, goes Off when spaces are
received, and blinks at a steady rate when
variable data are received.

2  

ITU-T designation.

Содержание Comsphere 3511






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды