Paradyne 9126 Скачать руководство пользователя страница 320

Страница: 320 / 470

10. Setting Up NetScout Manager Plus for FrameSaver Devices

10-6

September

2002

9128-A2-GB20-80

Correcting Domains and Groups

Properties need to be edited when not using the Paradyne-provided file and when:

An unsupported domain needs to be deleted.

A missing domain needs to be added.

Groups, Samples, Interval, and Logging are not configured as specified in

Step 3

Verifying Domains and Groups

Procedure

1. Select the Property... button (down the center of the Configuration Manager

main window). The Property Editor window opens.

2. To delete an unsupported domain, click on the domain from the Domains list,

then select the Delete button.

The

Are you sure?

prompt appears. Select Yes. The unsupported domain

disappears from the list.

Содержание 9126























































































































































































































































































































































































































































































Результаты поиска

Содержание 9126

Отзывы:

Бренды по названию

Популярные бренды

Paradyne 9126, Руководство пользователя

Результаты поиска

Содержание 9126

Отзывы:

Бренды по названию

Популярные бренды