2
9109-A2-GK40-00
November 1996
"
Procedure
1. Remove the bottom Jack-screw from the I/O card, below the 50-position
interface.
2. Align the anchor mount provided with the screw hole, reinsert the
Jack-screw, and tighten it securely.
3. Feed the cable tie provided through the anchor mount, about 2/3 of the way.
4. Plug in the 50-pin end of the cable, and secure the connector by screwing
the top cable screw into the top Jack-screw.
5. Wrap the long end of the cable tie around the cable, and feed it through the
other end of the cable tie, tightening the cable to the anchor mount, then
clipping the excess.
6. Connect the other end of the cable to the M66 block.
496-15181
Anchor
Mount
Jack-Screw
50-Pin
Connector
