Paradyne 7123, Руководство пользователя

Страница: 127 / 146

B. SNMP MIBs and Traps
7123-A2-GB20-00 September 2001
B-9
Traps: enterprise-Specific
These traps indicate that an enterprise-specific event has occurred. Supported
enterprise-specific traps are listed below.
Table B-6. enterprise-Specific Traps and Variable-Bindings
Trap Variable-Bindings Possible Cause
enterpriseConfig-
Change(6)
„
devLastTrapString
(devHealthAndStatus.-
mib) Configuration has been changed
via the menu-driven user
interface, an SNMP Manager, or
auto-configuration after
60 seconds has elapsed without
another change.
String:
‘Device configuration change.’
enterprisePrimary-
ClockFail(1)
„
devLastTrapString
(devHealthAndStatus.-
mib) Operating software has detected
that the primary clock source has
failed.
String:
‘Primary clock failed.’
enterprisePrimary-
ClockFailClear(101) Operating software has detected
that the primary clock source is
operational again.
String:
‘Primary clock restored.’
enterpriseSelfTest-
Fail(2)
„
devLastTrapString
(devHealthAndStatus.-
mib) Unit has completed
(re)initialization and a hardware
failure was detected.
String:
‘Self test failed: $
s.’ ($s is the
contents of devSelfTestResult.)
enterpriseTest-
Start(5) For physical interfaces:
„
ifIndex (RFC 1573)
„
.0.0 (placeholder)
„
devLastTrapString
(devHealthAndStatus.-
mib
At least one test has been started
on an interface.
String:
‘$testString test started on
$ifString.’ (e.g., ‘DTE Loopback
test started on Sync Data Port
S01P1.’)