8
7112-A2-GN10-40
February 2000
Table 3.
Network Interface Options
Configuration Option
Settings (default in Bold)
Primary Clock Source
Network, Internal, Port
Line Framing Format
ESF, D4
Line Coding Format
B8ZS, AMI
Bit Stuffing
62411, Part68, Disable
Line Build Out (LBO)
0.0, –7.5, –15, –22.5
FDL Management Link
Enable, Disable
FDL IP Address
000.000.000.000 – 255.255.255.255, clear
FDL Subnet Mask
000.000.000.000 – 255.255.255.255
Network Initiated Line Loopback (LLB)
Enable, Disable
Network Initiated Payload Loopback
(PLB)
Enable, Disable
ANSI Performance Report Messages
Disable, Enable
Circuit Identifier
< Blank >
Table 4.
Cross Connect Assignments
Configuration Option
Settings (default in Bold)
Assign By
Block, ACAMI, Channel
Synchronous Data Port Assignments
P(B)
The default is all DS0s assigned to the
data port
...
data port.
P(B)
Table 5.
Data Port Options
Configuration Option
Settings (default in Bold)
Port Base Rate
Nx64, Nx56
Invert Transmit Clock
Enable, Disable
Transmit Clock Source
Internal, External
Invert Transmit and Received Data
Enable, Disable
Send All Ones on Data Port Not Ready
Disable, DTR, RTS, Both
Action on Network Yellow Alarm
None, Halt
Network Init. Data Channel Loopback
Disable, V.54, FT1, Both
Port (DTE) Initiated Loopbacks
Disable, DTLB, DCLB, Both
