manualshive.com logo in svg

Paradyne 6501, Руководство по установке

Поделиться
Скачать
Paradyne 6501 Скачать руководство пользователя страница 25

 25

Troubleshooting Your SuperLine IAD

Symptom – Phones

Action

There is no dial tone
at one or all of the
three PHONE jacks.

Check the connections of the SuperLine IAD to the wall jack,
and your devices to the SuperLine IAD. If the problem
persists, contact your service provider.

The existing (BASE)
phone has dial tone
but does not ring.

Verify the total Ringer Equivalence Number (REN) of all of
the devices connected to your existing phone number and
the BASE PHONE jack does not exceed 5. REN is normally
specified on a label on the phone, fax machine, or modem.

You detect noise on a
phone that uses the
same phone number
as the SuperLine IAD.

Verify that every device in your home that uses the same
phone number as the SuperLine IAD has a filter properly
installed (as described on page 4). This may include not
only phones, but answering machines, fax machines,
modems, caller ID display devices, security alarm systems,
TV-based Internet access devices, and direct broadcast
satellite receivers.

The phone connected
to the PHONE 1/2 or
PHONE 2 jack does
not ring but you can
place calls.

Verify the total Ringer Equivalence Number (REN) of all of
the devices connected to your PHONE 1/2 or PHONE 2 jack
does not exceed 3 each. REN is normally specified on a
label on the phone, fax machine, or modem.

The PHONE 2 jack
has no dial tone.

Verify that your service provider has supplied you with two
additional lines.

You detect noise on
the phone connected
to the PHONE 1/2 or
PHONE 2 jack.

Verify that every device in your home that uses the same
phone number as the SuperLine IAD has a filter properly
installed (as described on page 4). This may include not
only phones, but answering machines, fax machines,
modems, caller ID display devices, security alarm systems,
TV-based Internet access devices, and direct broadcast
satellite receivers.

Verify that you are 

not using a 4-wire phone cable for the

device connected to the PHONE 1/2 jack. Use only a 2-wire
cable to connect a device to the PHONE 1/2 jack (unless
you are connecting a 2-line phone as described on page 18).

Содержание 6501







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды