6
Table 2. Network Interface Configuration Options (2 of 2)
Option
Comments/Description
Factory 2
Factory 1
NET LLB:
Enab
Enab
Network-initiated LLB allows LLB to be
NET LLB:
Disab
Disab
Network-initiated LLB allows LLB to be
controlled by inband LLB codes.
NET PLB:
Enab
N/A
Network-initiated PLB allows PLB to be
NET PLB:
Disab
N/A
Network-initiated PLB allows PLB to be
controlled by FDL PLB messages.
N/A
62411
Enforces ONEs density protection per
BitStuff:
N/A
Part68
Enforces ONEs density protection per
AT&T TR 62411, ANSI T1-403, and
FCC Part 68 Technical Publication
Disab
,
,
FCC Part 68 Technical Publication.
AIS
AIS
KeepAlive:
One (Framed
All Ones)
One (Framed
All Ones)
Specifies the keep alive signal to send
to the network interface on a failure of
KeepAlive:
NetLp
(Loopback of
network signal)
NetLp
(Loopback of
network signal)
to the network interface on a failure of
the DTE signal.
Yellow:
Enab
Enab
Transcodes and sends Yellow signal to
the network on receiving Yellow from
Yellow:
Disab
Disab
g
the network on receiving Yellow from
DTE.
Circuit Ident:
Edit
Edit
Specifies the transmission vendor’s
Circuit Ident:
Clear
Clear
Specifies the transmission vendor s
circuit identifier.
CRC PThru
Enab
Enab
Determines whether framing bits are
CRC PThru
(Passthrough):
Disab
Disab
Determines whether framing bits are
passed to the DTE.
Table 3. General Configuration Options
Option
Factory 1
Factory 2
Comments/Description
Tst Timeout:
Enab
Enab
Specifies whether user-initiated
tests are limited by the Tst Duration
Tst Timeout:
Disab
Disab
tests are limited by the Tst Duration
configuration option.
10
10
Tst Duration:
Up
Up
Specifies in minutes the duration of
Tst Duration:
Down
Down
Specifies in minutes the duration of
user-initiated tests.
Save
Save
