StayD represents a new concept for living with a security system. Unlike any security system before, the
unique StayD feature seamlessly integrates security into your everyday life to give you safe, simple living with
peace of mind.
The StayD mode, offered in the MG and SP series of panels from Paradox Security Systems, is the only safe
security system that’s always secured. StayD living simplifies your life and makes it safer by protecting you
24 hours a day, without ever need to disarm the system, without any unprotected periods, and automatically
re-arming closed zones so you don’t have to remember to do it.
Entering the Site:
Entering the site in StayD mode through one of the
entry point zones (door) will start an entry delay
for that door only (all other entry doors remain
armed). A code must be entered to end the entry
delay. When the opened door is closed, the zone
automatically rearms. If multiple zones are assigned
to the keypad as entry/exit points, the code will end
the entry delay for all assigned zones and confirm
that it is a valid entry. Opened zones generating an
entry delay are displayed on the keypads. Other
zones will not be displayed until the entry delay is
cleared.
Inside the Site
Changing from Stay to Sleep and back requires no code entry and is done by pressing the appropriate button on
the keypad. A code will be required only if an entry delay has started due to the opening of a secured zone.
When switching from Stay to Sleep, the currently armed zones remain armed and only the Sleep zones will
start a delay allowing you enough time to safely approach the bedroom (the “sleep” area) before arming the
rest of the house. The system instantly changes from Sleep to Stay, allowing you to safely approach the
kitchen or bathroom at night or when needed.
Leaving the Site
Leaving the house while keeping the inside
secured in StayD is done by pressing the Arm key
on the keypad that the exit door is assigned to (by
programming). This will start an exit delay period for
this door only. After all exit doors assigned to the
keypad are closed, the zones will rearm instantly.
Up to 4 zones can be assigned to each keypad for
scenarios where there is a need to trigger multiple
zones to exit the property (e.g. a door to the garage,
the garage rolling door, crossing an outdoor
detector and a gate to leave the property). If you
try to exit from a keypad that does not have any
zones assigned as entry/exit points, you will hear a
rejection beep and the request will be denied.
Entry/Exit Path
StayD features programmable entry/exit paths. Users enter and exit the property through pre-defined points
with only specific zones open for passage. Each entry point leading to a keypad on the site is programmed
into the keypad’s path, which consists of up to 4 zones. When entering or exiting a site, only the path (zones)
assigned to the keypad will start a delay; all other zones remain armed.
To Enter the Site:
1. Enter site through entry point door
2. Starts an entry delay for that door only
3. Enter
[CODE]
to end the entry automatically
rearm in
Stay Arm
.
To Leave the Site:
1. Press and hold
[ARM].
2. Starts exit delay for this door only.
3. After exit delay, system automatically rearms
in
Full Arm.
To Switch to Sleep Mode:
1. Press and hold
[SLEEP]
.
2. After delay, system automatically rearms
in
Sleep Arm
.
To Switch to Stay Mode:
1. Press and hold
[STAY]
.
2. System automatically rearms in
Stay Arm.
Enter the premises while automatically re-arming
the perimeter (stay arm).
Leave the premises while automatically securing
the entire property (full arm).
Remain on site and move freely within the secured
perimeter (e.g. doors and windows)
Remain in a more highly secured area (e.g. bedroom)
while the rest of the site is fully secured.
= Entering the site
X
= All other entry points remain armed
= Armed
= Exiting the site
X
= All other exit points remain armed
= Armed
STAY
SLEEP
