> Support IPC UPnP, 4PoE
ports
Paradox Alarm K10V LED Keypad User Guide
2
Bypass Programming
Bypassing a zone allows you to ignore (deactivate) specified zones
the next time the system is armed.
• Press the
[
BYP
]
key.
• Enter your 4 digit PIN Code
• Enter the Zone you wish to bypass. (2-Digit Zone number)
• Press
[
Enter
]
to save and exit.
• Arm the Alarm System.
*** Once the Alarm System is disarmed, the Bypass will be
cleared and must be entered again if required. Bypass clears
on each disarm.
Bypass Recall Feature
After disarming the system, bypass entries are erased.
The Bypass Recall feature reinstates the previous bypass entries
saved in memory. This eliminates the need to manually re-program
the bypass entries every time you arm your system.
• Press the
[
BYP
]
key.
• Enter your 4 digit PIN Code
• Press the
[
BYP
]
key.
• Press Enter to save and exit.
• Arm the Alarm System.
Alarm Display
If an alarm has occurred on a zone, the respective zone key will
flash, the
[
MEM
]
key will light up, and the zones will be stored in
memory.
• Press the
[
MEM
]
key. ( Triggered Zones will illuminate)
• Press the
[
CLEAR
]
key to exit.
***
The alarm memory will be erased when the next alarm
occurs and after a valid code is entered or upon full-arming
the system.
Additional Features
Deleting a User
• Press the
[
PWR
]
key.
• Enter your 4 digit MASTER PIN Code
• Select a user by entering a 2-digit user number (02 to 32). Press and hold the
[
SLEEP
]
key until
you hear the confirmation beep
• Press
[CLEAR]
to exit.
