Paradox PRK-315, Справочное и монтажное руководство

Страница: 14 / 32

10 Reference & Installation Manual
2.8 S
YSTEM
R
ESET
Performing a system reset will set the Parakey to
default settings. Please note that if connected to a
control panel, the reset sequence of the Parakey
will not cause the control panel to reset and vice
versa. To execute a system reset perform the
following:
1) Remove the power connections ("+12" &
"
GND
") from the receiver.
2) Press and hold the [
PROG
] button and re-
connect the power connections to the receiver.
3) Wait approximately 2 seconds and release the
[
PROG
] button. The red LED will flash for 15
seconds, the keypad will beep, and all system
settings will be reset to factory default.