Paradox PMD2P Скачать руководство пользователя страница 2

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

PMD2P-EI01 - Printed in Canada 06/2013

Specifications

Sensor Type

Dual rectangular element

Coverage

88.5° - 11m (36ft) x 11m (36ft); Center beams: 15m (49ft)

Pet Immunity

18kg (40lbs)

RF Frequency

433 or 868 MHz with Magellan only

Lens

2nd generation Fresnel lens, LODIFF® segments

Walk Speed

0.2m to 3.5m/s (0.6ft to 11.5ft/s)

Battery Type & Life

3 x 1.5vDC “AAA” alkaline batteries; 2 years*

Current Rating

31uA standby / 15mA alarm

Transmitter Range

35m (115ft) with MG6130 / MG6160
70m (230ft) with MG5000 / MG5050 / RTX3; in a typical residential environment

Operating Temp. & 
Humidity

0°C to 50°C (32°F to 122°F) / 5 to 90% max.

Dimensions & Weight

6.5 x 12.5 x 5.2cm (2.5 x 4.9 x 2.0 in) / 105 g (3.7 oz) with batteries

RF Immunity

EN 50130-4: 10V/m 80MHz to 2.7GHz

Compatibility

See paradox.com for compatibility details

Certification

EN 50131 Grade 2 Class II; Certification body Intertek

* Battery life expectancy will vary according to the amount of traffic (movement) detected. Higher traffic levels will lower battery life.

Alive Software

To conserve the motion detector’s battery life, if the motion detector transmits two open zone signals (LED on for 3s) 
within a five-minute period, the detector will fall into Energy Save Mode for approximately three minutes and will not 
transmit any alarm signals. The red LED will continue to flash to indicate a detection. If the detector’s cover is removed 
and then replaced while in Energy Save Mode, the first detection will trigger an alarm signal.

Walk-testing

To activate Walk-test Mode for three minutes, power up the detector or open and close the detector’s cover. With 
sensitivity set to High (S2 = High), at 20°C, crossing more than one complete zone (consisting of two beams left and 
right sensor detecting elements) with slow/fast walking or running should initiate an alarm. With sensitivity set to Low 
(S2= Low), the amount of movement required to generate an alarm is doubled.

Beam Pattern

2.1m

(6.8ft)

0

0

2m

(6.6ft)

2m

(6.6ft)

2m

(6.6ft)

4m

(13.1ft)

4m

(13.1ft)

4m

(13.1ft)

6m

(19.7ft)

6m

(19.7ft)

6m

(19.7ft)

8m

(26.3ft)

8m

(26.3ft)

8m

(26.3ft)

10m

(32.8ft)

12m

(39.4ft)

14m

(45.9ft)

16m

(52.5ft)

12m

(39.4ft)

14m

(45.9ft)

16m

(52.5ft)

10m

(32.8ft)

10m

(32.8ft)

12m

(39.4ft)

14m

(45.9ft)

16m

(52.5ft)

88.5°

Warranty

: For complete warranty information on this product, please refer to the Limited Warranty Statement found on the Web site www.paradox.com/terms. Your use of the Paradox

product signifies your acceptance of all warranty terms and conditions.

© 2013 Paradox Ltd. All rights reserved. Specifications may change without prior notice. 

Patents

: One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, and RE39406 and other pending patents

may apply. Canadian and international patents may also apply.

Отзывы: