Paradox Paradox Digiplex DGP-610, Руководство пользователя

Страница: 14 / 57

Digiplex LED Keypads 15
If enabled by your installer, the One-Touch Buttons (section 3.6) or
a keyswitch (section 3.7) can also be used to arm the area.
3.5 F
ORCE
A
RMING
Force Arming allows you to arm your system when specific zones are
open. Certain zones can be programmed by the installer to remain
unarmed when you initiate Force Arming. Once the open zone is closed,
however, the system will then arm it as well. Only
User Access Codes with
the Force Arm option enabled can Force Arm the system. Also, see
section 3.8 Auto-Arming for another everyday arming option.
This feature is commonly used when a motion detector is protecting an
area that is occupied by a keypad. During Force arming, the motion
detector will remain unarmed until you exit the area that it protects. The
system will then arm the motion detector.
How do I Instant Arm?
1) Enter your [
ACCESS CODE
] .
The keypad will emit a Confirmation Beep. The [
ACCESS
] Symbol will flash.
2) Press the button.
If you have access to more than one area, press the Number Button
representing the area you want to Instant Arm or
[0]
for all assigned areas.
After the Confirmation Beep, the Exit Delay Timer will begin the countdown
to arming.