background image

10 

Reference & Installation Manual

WinLoad Connection

The Magellan console can be programmed and monitored 
through the WinLoad Installer Upload/Download Software for 
Windows®. WinLoad allows for remote or on-site uploading and 
downloading using most standard modems. It also allows for 
advanced printing of reports and supports several languages 
simultaneously. Connect Magellan to a computer containing the 
WinLoad software as shown in Figure 10 on page 10.

Refer to the WinLoad’s Online Help for more information 
on WinLoad.

Figure 10: On-site Connection

UIP-256 Universal In-Field Programmer 
Connection

Magellan’s firmware can be upgraded locally using the UIP-256 
Universal In-Field Programmer. The UIP-256 includes 
proprietary PC software, cables to interconnect Magellan and a 
PC, as well as two 9V batteries. Connect the UIP-256 as shown 
in Figure 11 on page 10.

Refer to the Universal In-Field Programmer (UIP-256) 
Instructions 
for more information.

Figure 11: Connecting the UIP-256

X10 Transmitter Connection (MG-6160 only)

Magellan supports the X10 communication protocol. X10 is a 
communication protocol for remote control of electrical devices 
such as lamps and appliances. Communication is accomplished 
through standard household electrical wiring using X10 
transmitters and receivers. Configure Magellan, with the use of 
an X10 transmitter, to automate a home. Connect the X10 
transmitter as shown in Figure 12 on page 10.

Refer to the Magellan X10 Instructions on our website, 
paradox.com, for information on using and configuring 
Magellan’s X10 feature.

Figure 12: Connecting the X10 Transmitter

The X10 feature is not for use in UL installations.

Connecting a Paradox Memory Key (PMC-3)

When using a Paradox Memory Key with a Magellan console, 
remove power (both AC and battery power) and connect the 
memory key to the 5-pin connector on the back of the Magellan 
console as shown in Figure 13 on page 11. Once connected, re-

306 Adapter

Back view of the 
Magellan console.

Standard

DB-9 cable

(9-pin serial cable)

Computer 

containing 

WinLoad 

software

4- to 10-pin cable 

(supplied with 

the 306 Adapter)

4-pin 

connector 

cable 

Connect the 10-pin 

cable of the UIP-256 to 
the 10-pin connector of 

the Magellan console.

Standard

DB-9 cable

(9-pin serial cable)

Download latest 

Magellan 

firmware from 

paradox.com

Back view of the 
Magellan console.

UIP-256

Universal In-Field 

Programmer

4-pin 
RJ11 

cable

X10 transmitter

1. Connect one end of the 

4-pin RJ11 cable into the 

X

10 plug of the console.

2. Connect the other end of 

the 4-pin RJ11 cable into 
the X10 transmitter.

3. Plug the X10 transmitter 

into a standard wall 
outlet.

1

2

3

Back view of the Magellan console.

Содержание MG-6130





















































Отзывы: