Paradox Magellan MG-6060, Справочное и монтажное руководство

Страница: 32 / 52

30 Reference & Installation Manual
the telephone call from the Magellan console is received, the [#]
key on the telephone can be pressed twice to acknowledge and
end the message or the
[1] can be pressed to use the
speakerphone feature and talk through the Magellan console.
To program the Utility Reporting feature using the Magellan
console:
1. Press
[
MENU
] and then press the [4] key.
2. Enter the [
INSTALLER CODE
] and then press the [3] key.
3. Press [
NEXT
] until the Utility Reporting screen appears, then
press [
OK
] .
4. Press [
NEXT
] until the desired telephone number appears,
then press [
OK
] .
5. Enter the desired telephone number and then press [
OK
]
twice.
6. Press [
NEXT
] until the desired report type appears, then
press [
OK
] (see Report Types on page 30).
7. Press [
NEXT
] until the Record Alrm Mes? screen appears,
then press [
OK
] .
8. Record the alarm message.
Report Types
There are four report types that can be used with Utility
Reporting.
•
Disarm with user : The Magellan console calls the user
when specific users disarm the system.
• System troubles : The Magellan console calls the user
when specific troubles appear.
• Paramedic alarm : The Magellan console calls the user
when specific users require emergency assistance and
press the appropriate key on their remote controls.
• Zone activation : The Magellan console calls the user
when a specific zone is breached or opened.
Refer to the Magellan User Guide for more information
on using this feature.
Console Account Number
Section [107]
All report codes are preceded by a 4-digit or 3-digit Console
Account Number to ensure correct identification of the Magellan
console. The Console account number can be any hexa-digit
from 1 to F. To enter a 3-digit account number, simply press the
[1] key from the center keypad, followed by the 3-digit account
number. Also, when using 3-digit account numbers, you must
use 1-digit report codes.
Reporting Formats
Section [105] = Reporting format for MSTN 1
Section [106] = Reporting format for MSTN 2
The reporting formats apply only to the MSTNs (Monitoring
Station Telephone Numbers) programmed in sections [111] and
[112] (page 29)
The Magellan console can use a number of different reporting
formats and each monitoring station telephone number can be
programmed with a different reporting format. The three digits
entered into section [105] represent the reporting format used to
communicate with Monitoring Station Telephone Number 1 while
the three digits entered into section [106] represent the reporting
format used to communicate with Monitoring Station Telephone
Number 2.
Table 10: Reporting Formats
UL Note: The installer is required to verify the complete
compatibility of the DAC Receiver and formats at least
once per year.
If using SIA as your report format in sections 105 and 106,
to enter a “0”, press the space key ([1] key on the center
keypad). To enter an “A”, press [0] on the main keypad. In
other report formats, to enter a space (non-reportable
digit), press the [1] key on the center keypad.
Standard Pulse Formats
The Magellan console can use the Ademco slow, Silent Knight
and SESCOA standard pulse reporting formats (see Table 10 on
page 30).
Ademco Contact ID
Ademco Contact ID is a fast communicator format that uses tone
reporting instead of pulse reporting. This communicator format
also uses a pre-defined list of industry standard messages and
report codes that will suit most of your basic installation needs.
• To manually program the report codes, use the 2-digit
hexadecimal values from Appendix 2: Ademco Contact ID
Report Code List on page 40.
• Enter 00 to disable reporting or FF to use the default report
code from Appendix 1: Automatic Report Code List on page
38.
SIA FSK
SIA FSK is a fast communicator format that uses tone reporting
instead of pulse reporting. This communicator format uses a pre-
defined list of industry standard messages and report codes that
will suit most basic installation needs.
Please refer to Appendix 1: Automatic Report Code List on
page 38 for a complete list of the format’s pre-defined
industry standard messages and report codes.
Event Call Direction
Section [100]: Options [1] to [3]; Arming/Disarming
Option [1] ON = Call MSTN 1
Option [2] ON = Call MSTN 2
Option [3] ON = Call Pager telephone number
Section [100]: Options [5] to [7]; Alarm/Alarm Restore
Option [5] ON = Call MSTN 1
Option [6] ON = Call MSTN 2
3-digit Value Reporting Format
001 Ademco slow (1400Hz, 1900Hz, 10BPS)
002 Silent Knight Fast (1400Hz, 1900Hz, 10BPS)
003 SESCOA (2300Hz, 1800Hz, 20BPS)
004 Ademco Contact ID
005 SIA FSK