Magellan / Spectra SP
9
Arming & Disarming
Take full advantage of your system by familiarizing yourself with all the arming methods. If your system is not partitioned (see
Partitioning
on page 6), everything is considered as belonging to Partition 1.
If you cannot arm because a zone is open, the system will enter in Bypass Programming. Enter the two digit zone you wish to bypass and press
[
ENTER
]
, or press
[
ENTER
]
to bypass all open zones.
Regular Arming
This method will arm all the zones in the selected partition. Please note that Regular arming can also be activated using Auto-Arming (see
Auto-Arming
on page 10) or One-Touch arming (see
One-Touch Arming
on page 10).
Sleep Arming
Similar to Stay arming, Sleep arming allows users to remain in a protected area, but provides a higher level of protection. For example, in
a two-story house, the perimeter is protected with Stay arming. With Sleep arming, the perimeter as well as the main floor are protected
(motion detectors, etc.), allowing you to roam the second floor and sleeping quarters. Sleep zones are zones that are bypassed when
Sleep arming. For example, when you go to sleep at night, the entire premises except your bedroom is fully armed. Sleep arming can
also be activated using Auto-Arming (see
Auto-Arming
on page 10) or One-Touch arming (see
One-Touch Arming
on page 10).
Stay Arming
This method allows you to roam freely within the premises while the perimeter is fully armed. Stay zones are zones that are bypassed
when Stay arming. For example, if you plan on staying in for the night, doors and windows can be armed without arming other zones like
motion detectors. Stay arming can also be activated using Auto-Arming (see
Auto-Arming
on page 10) or One-Touch arming (see
One-
Touch Arming
on page 10).
How do I Regular arm?
1 Close all zones in the desired partition.
2 Press
[
ARM
]
+
[
ACCESS
CODE
]
.
3
If you have access to both partitions (see
Partitioning
on page 6): Press the key corresponding to the desired partition (
[1]
or
[2]
)
.
For both partitions, press the other key after the confirmation beep.
How do I Sleep arm?
1 Close all zones in the desired partition (except Sleep zones
).
2 Press the
[
SLEEP
]
key.
3 Enter your
[
ACCESS
CODE
]
.
4
If you have access to both partitions (see
Partitioning
on page 6): Press the key corresponding to the desired partition,
[1]
or
[2]
.
For both partitions, press the other key after the confirmation beep.
How do I Stay arm?
1 Close all zones in the desired partition (except Stay zones
).
2 Press the
[
STAY
]
key.
3 Enter your
[
ACCESS
CODE
]
.
4
If you have access to both partitions (see
Partitioning
on page 6): Press the key corresponding to the desired partition,
[1]
or
[2]
.
For both partitions, press the other key after the confirmation beep.
