Panic Alarms
To send a silent or audible alarm to your
security company, press and hold one of the
button combinations listed for three
seconds.
Trouble Display
When a trouble condition occurs, the [TBL]
key will illuminate.
Bypass Programming
Bypassed zones remain unarmed when the
partition is armed.
Alarm Memory Display
To view the alarms that occurred during the
last armed period:
Keypad Settings
To mute the keypad, press and hold the
[CLEAR] key for six seconds to enable or
disable Keypad Muting.
To modify the backlight:
Chime Programming
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
Panic Alarm Type
Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [7]
Press [7] & [9]
Step
Description
1.
Press the [TBL] key. The key will
flash and number(s) corresponding
to the trouble(s) will illuminate.
2.
Read the corresponding explana-
tion of the trouble from the trouble
list in the control panel user guide. If
no repair instructions are given, call
your security company for repairs.
3.
Press the [CLEAR] key to exit.
Step
Description
1.
Press the [BYP] key.
2.
Enter your [ACCESS CODE]**
3.
The corresponding LED of all open
zones will illuminate. Select the
zone(s) you want to bypass by
entering the two-digit zone number
(e.g., zone 3 = 03). The correspond-
ing zone LED will flash.
4.
Press the [ENTER] key to save and
exit.
Step
Description
1.
Disarm the system.
2.
Press the [MEM] key.
3.
The corresponding zone numbers
that were in alarm the last time the
system was armed will illuminate.
4.
Press the [CLEAR] key to exit.
Step
Description
1.
Press and hold the [
] key for
three seconds.
2.
The [MEM] key will illuminate.
3.
Press the [
] key to set the
desired backlight level.
4.
Press [CLEAR] or [ENTER] key to
exit.
Step
Description
1.
Press and hold the [
] key for
three seconds.
2.
Select the zones you want to Chime
by entering the two-digit zone
number. The corresponding zone
LED will flash. For example, to
chime zone 2, enter [0] then [2].
The keypad will automatically save
once the two-digit zone number is
entered.
3.
Press the [ENTER] key to exit.
© 2014 Paradox Ltd. All rights reserved.
Specifications may change without prior notice.
For complete patent, trademark, certification and warranty
information, please visit www.paradox.com.
