background image

IP150 Internet Module

User Guide V1.3 - IP150-EU01
Printed in Canada 07/2013

Introduction

The IP150 Internet Module is an Internet communication module that enables you to control and 
monitor your security system through any web browser (e.g. Internet Explorer). The IP150 provides 
freedom to access your system and receive email notifications anywhere in the world.

IMPORTANT:

 The IP150 module should only be configured by the installer or a qualified network 

administrator. For more information on module configuration, consult the IP150 Reference and 
Installation Manual.

Connecting via the IP150 Internet Module

In order to connect to your IP150, you will need the following information:

• Paradox DNS Site ID:   The DNS SiteID is set by your installer.

• Panel user code: 

This is the same code you enter on your keypad to arm the system.

• Module password: 

 The default password is “paradox”. To change your password, 
see “Change Password” in the Account Information Screen section.

To connect with your system from an external computer:

1.  Open a web browser (e.g., Google Chrome).

2.   In the address bar, enter http://www.paradoxmyhome.com/SiteID 

where “SiteID” is your Paradox SiteID (set by your installer).

3.  Log in using your panel user code and module password (default = paradox).

Troubleshooting

System Status Screen

The System Status screen displays important system information.
From the System Status screen, you can arm / disarm your system as well as monitor your system in real-time.

Once you have
established a
connection for the first
time, you are prompted
to change your
password from the
default “paradox”.

System Troubles

When a trouble occurs in the system,  
it is displayed at the top of the System 
Status screen.

Note:

 If there are no troubles in the 

system, the System Troubles box  
is not displayed.

Area Status

The IP150 provides a real-time display 
of your area status.

Zone Status

The IP150 provides a real-time display 
of your zone status.

Legend

The Legend gives you information on the 
icons shown in the Area Status display.

StayD

The StayD logo appears when StayD 
mode is enabled (Spectra SP and 
Magellan only).

Site Name

The site name uniquely identifies 
your system.

Note: 

By default, your site name is 

“Your Paradox System”. 
To change your site name, see “Account 
Information Screen” on page 2.

Account Information

For information on changing account 
information, see page 2.

Arm / Disarm

Click the        or        button and select the 
arm/disarm action you with to perform.

1

1

2

2

3

3

4

4

6

6

7

7

8

8

5

5

Symptoms

Solution(s)

No LEDs lit; no signs of 
operation

• Check cable connections
• Check power status

IP150 cannot be  
accessed remotely

• Check spelling of access commands
• Check IP and power status on unit

No reporting

•  Verify panel troubles, panel programming, and /

or receiver status

If the above information does not help remedy the problem, please  
contact your installer.

Содержание IP150

Страница 1: ...splays important system information From the System Status screen you can arm disarm your system as well as monitor your system in real time Once you have established a connection for the first time you are prompted to change your password from the default paradox System Troubles When a trouble occurs in the system it is displayed at the top of the System Status screen Note If there are no trouble...

Страница 2: ...following information for quick reference Account Information Alarm system installer information Monitoring station information Receiver Configuration Screen The Receiver Configuration screen allows you to configure your module for IP reporting 1 1 2 3 System Information Screen The System Information screen contains important hardware and software information on both your security system your IP15...

Страница 3: ...ure that the panel s report code format is set to Ademco Contact ID MG SP E section 810 EVO section 3070 2 Enter the IP reporting account numbers one for each partition MG SP E section 918 919 EVO section 2976 to 2983 3 In the General IP Options section set up IP line monitoring options and dialer options and ensure IP reporting is enabled see the following tables LED Description User On when a us...

Страница 4: ...for the ParadoxMyHome connection is up to date However a shorter delay for the polls will increase the traffic on the internet WAN Step 4 Using a Web Browser to Access the System Once the module is configured it can be accessed either from the local network or through the internet using the alarm system s user code or user IP150 password On Site Access 1 Enter the IP address assigned to the IP150 ...

Отзывы: