Digiplex & DigiplexNE
-
2
-
Module
s
Programming Guide
Copy Contents of the Grafica Keypad to the Memory Key
.
1)
Insert the
Memory Key
onto the keypad’s connector (refer to “Memory Key Connector” on page 4). Ensure that the write protect jumper is on (refer to
"Memory Key (PMC-3)" below).
2)
To copy the contents to the
Memory Key
, enter the keypad’s programming mode and enter section
[110]
.
3)
Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the
Memory Key
. Remove the
Memory Key
’s jumper
if you do not wish to accidentally overwrite its contents
.
MEMORY KEY CONNECTOR
MEMORY KEY (PMC-3)
The memory key will only function with a keypad that has the DGP2 or DNE prefix in the model number. Only the PMC-3 memory key will
function with DGP2 and DNE keypads.
PMC-3
Jumper
ON
:
Can copy and download
contents.
Jumper
OFF
:
Cannot override the contents
of the memory key.
