Paradox Esprit E55, Руководство по программированию

Страница: 26 / 48

24 Programming Guide
Programmable Output Delays & Recognition
System Report Codes
Entering Report Codes
Ademco Slow , Silent Knight , SESCOA , and Ademco Express Formats :
Enter the desired 2-digit hex value (00-FF).
Ademco “Programmable” Format :
Enter the desired 2-digit hex values from the “Ademco Report Code List - Programmable” (see page 26). Also Note that entering FF will
set the report code to the “Automatic Report Code List” (see page 28).
Ademco “All Codes” Format :
The control panel automatically generates report codes from the “Ademco Report Code List - All Codes” (see page 26).
Refer to Decimal and Hexadecimal Values on page 3.
Clear System Report Codes
Reset System Report Codes
Special Arming Report Codes
(Default = FF)
Section Data Default = 005
[281] PGM 1: (E55/E65 onboard) ___/___/___ (000 to 255 x 1 sec./mins.)
[282] PGM 2: (E65 onboard) ___/___/___ (000 to 255 x 1 sec./mins.)
[283] PGM 3: (E65 onboard) ___/___/___ (000 to 255 x 1 sec./mins.)
[286] PGM 6: (ZX8 ID =+1) ___/___/___ (000 to 255 x 1 sec./mins.)
[287] PGM 7: (ZX8 ID =+9) ___/___/___ (000 to 255 x 1 sec./mins.)
[288] PGM 8: (ZX8 ID =+17) ___/___/___ (000 to 255 x 1 sec./mins.)
[289] PGM 9: (PGM4 output 1) ___/___/___ (000 to 255 x 1 sec./mins.)
[290] PGM 10: (PGM4 output 2) ___/___/___ (000 to 255 x 1 sec./mins.)
[291] PGM 11: (PGM4 output 3) ___/___/___ (000 to 255 x 1 sec./mins.)
[292] PGM 12: (PGM4 output 4) ___/___/___ (000 to 255 x 1 sec./mins.)
[966] Clear Report Codes
Option OFF ON
[3]
Clear arm/disarm/alarm report codes*
N
Disabled
N
Enabled
[4]
Clear trouble report codes*
N
Disabled
N
Enabled
[5]
Clear system special report codes*
N
Disabled
N
Enabled
* Press [
ENTER
] to reset the respective set of report codes to default before exiting the section.
[967] Reset Report Codes
Option OFF ON
[3]
Reset arm/disarm/alarm report codes to default*
N
Disabled
N
Enabled
[4]
Reset trouble report codes to default*
N
Disabled
N
Enabled
[5]
Reset system special report codes to default*
N
Disabled
N
Enabled
* Enable all options you want to reset to default. Press [
ENTER
] to reset the respective set of report codes to
default before exiting the section.
Section Data Description Section Data Description
[860] _____/_____ Auto-arming [861] _____/_____ Quick arming
_____/_____ Late to close _____/_____ Arming via PC
_____/_____ No movement _____/_____ Arming with keyswitch
_____/_____ Partial arming _____/_____ N/A