Paradox Digiplex EVO EVO192 V7.11 Скачать руководство пользователя страница 59

Страница: 59 / 80

Digiplex EVO • Programming Guide

Version 7.11

Additional Settings and Modes | 59

Software Reset

To set specific software parameters back to their initial, default values, proceed as follows:
1.

Enter programming mode (refer to

Entering Programming Mode on page 3

for details).

Enter section

[4049]

to unlock the software reset function.

Enter the four-digit section corresponding to the software reset you wish to perform.

If you want to reset more than one section, enter section

[4049]

to unlock the software reset function once again.

Installer Function Keys

To access the installer functions, press and hold

, enter the installer code, and then:

•

For keypads K641R/K641LX/K641+

and K656: press the key indicated in

Table 57 on page 59

, that corresponds to the function you wish to activate.

Table 56: Description of Software Reset Sections ([4040] to [4049])

Section Description

[4040]

Entering this section will reset all programmable sections, from

[0001]

[3999]

, to their factory default values.

[4041]

Entering this section will reset the system master code to 123456.

[4042]

Entering this section will reset all zone programming, including sections

[0961]

[0984]

, to their default values.

[4043]

Entering this section will reset all access control sections, from

[2201]

[2712]

(excluding door labels), to their default values.

[4044]

Entering this section will reset all user code sections, from

[1001]

[1999]

and

[2001]

[2199]

, to their default values.

[4045]

Entering this section will reset programming of all dialer sections (

[3051]

[3081]

), VDMP3 sections (

[3087]

[3098]

), and control panel sections

(

[3020]

[3043]

and

[3900]

[3991]

), to their default values.

[4046]

Entering this section will reset all partition sections, from

[3101]

[3833]

(excluding partition labels), to their default values.

[4047]

Entering this section will reset programming of all PGM sections (

[0901]

[0959]

) and all keyswitch sections (

[0501]

[0632]

), as well as all keyswitch

arming/disarming report code sections (

[0701]

[0832]

), to their default values.

[4048]

Entering this section will clear all user labels, door labels, partition labels, module labels, and zone labels, from sections

[0301]

[0396]

[4049]

Entering this section will unlock software reset for sections

[4040]

[4048]

Table 57: Description of Installer Functions for the K641R/K641LX/K641+ and K656 Keypads

Function

Description

K641R/

K641LX/

K641+

K656

Test report

Sends the

Test Report

report code programmed in section

[3902]

, to the monitoring station.

STAY

Call BabyWare software

Will dial the PC telephone number programmed in section

[3010]

, to initiate communication with a

computer using the BabyWare software.

FORCE

SLEEP

Answer BabyWare
software

Will force the control panel to answer a call made by the monitoring station, which is using the
BabyWare software.

ARM

Cancel communication

Cancels all communication with the BabyWare software or with the monitoring station, until the next
reportable event.

DISARM

OFF

Installer test mode

This mode allows you to perform walk tests, where the bell or siren will squawk to indicate opened
zones.
To exit, press

MEM

(for K641R/K641LX/

K641+

) or (for K656). Partitions cannot be armed if the

installer test mode is enabled.

MEM

Start module scan

The keypad will display the serial number of each module on the combus.

TRBL

/TBL

Combus voltmeter

To verify if the combus is supplying sufficient power, press and hold

, enter the installer code, and

press either

ACC

or , depending on the type of keypad. A reading of 12.3V or lower, at the panel’s

service keypad connector, indicates that the voltage is too low. The voltage may drop during the
control panel battery test.

ACC

Содержание Digiplex EVO EVO192 V7.11

















































































Результаты поиска

Содержание Digiplex EVO EVO192 V7.11

Отзывы:

Paradox Digiplex EVO EVO192 V7.11, Руководство по программированию, Страница: 59 / 80

Результаты поиска

Содержание Digiplex EVO EVO192 V7.11

Отзывы: