Paradox Marine NAV-TRACKER 2.00, Руководство по установке

Страница: 7 / 13

Paradox Marine Technical Support
1 (866) 929-4441
7
proceeding to the next step. The body moulding is a snap fit assembly. This is a
once only fit to be completed after the connector has been wired.
*Do not snap on before wiring is complete.
Figure 5
2. Assemble contacts in to the Carrier Housing according to the table and pin
layout (Table 1, Figure 6). Ensure that the pins are in the correct location and
pushed fully in.
Pin Function Cable color code
1 0V (cable screen) [Screen]
2 Voltage In (VIN+) Red
3 0V (VIN-) Orange
4 OUT2 Yellow
5 OUT1 Green
6 IN2 Blue
7 IN1 Purple
8 Rx Grey
9 Tx White
10 0V (VIN-) Black
11 Not Used Not used
12 Not Used Not used
Table 1