GOST Immobilizer Remote Control Operating
Instructions
1.
Arm:
Press this button to set the alarm mode. The
alarm will sound once and the GOST
Immobilizer will shut down power from the
battery to the Engine Ignition. After 30 seconds
the current sensor will be activated also.
2.
Disarm:
Press this button to set the disarm mode. The
alarm will sound twice and the GOST
Immobilizer connects power from the battery to
the Engine Ignition.
3.
Silence:
Press this button to set silence mode, the alarm
will sound once and the GOST Immobilizer will
shut down power from the battery to the Engine
Ignition and switch off the siren completely. In
order to deactivate the GOST Immobilizer,
press
“
Disarm
”
button. To re-activate to sound
mode press the
“
Arm
”
button.
4. Panic:
When the GOST Immobilizer system detects an
unusual situation, the alarm will sound for 30
seconds. If the user presses this button, the
alarm will stop sounding, and it will reset to the
alarm mode. (GOST Immobilizer will continue to
shut down power from the battery to the Engine
Ignition and will not allow the engine to start).
5.
Finding Boat:
Press this button to find the Boat. The alarm
will sound continuously for 1 minute to help you
locate the Boat. Once located press the same
button once again, this will stop the alarm and
will not interrupt the other settings
6.
Set the sensitivity of voltage sensor +
Press the silence and disarm buttons
simultaneously and a confirmation tone will
sound once (this tone is distinguished from
the signal when the sensitivity of the shock
sensor is set). When the confirmation tone
sounds once, the lowest sensitivity level is
set. When you press the two buttons a
second time, the confirmation tone will sound
twice and thereby show that the medium
sensitivity level is set. When you press the
two buttons a third time, the confirmation tone
will sound three times and indicate that the
highest sensitivity level has been set. In order
to return to the original setting, press the two
buttons again. The original setting is the
highest sensitivity level.
7.
Passive Lock: +
This function will active the alarm function
automatically after the engine is off for 1 minute.
Passive Lock ON- Press the Silence and Arm
buttons at the same time and the alarm will
sound three times, to indicate that the unit is in
Passive Lock Mode.
Passive Lock OFF- Press the Silence and Arm
buttons at the same time and the alarm will
sound five times, to indicate that the unit is back
to manual Lock Mode.
When you use the Silence Alarm in Passive
Lock Mode, the GOST Immobilizer will enter to
Silence alarm automatically after engine off in 1
minute and the alarm will reset itself.
Functionality:
When the system is armed and after 30 seconds to
establish sustained memory current draw in device, an
Engine startup is attempted. The Bell Siren will sound
for 30 seconds (fixed) and the engine will not be
allowed to start.
PLEASE NOTE:
When the anti-theft function is in operation, the
GOST Immobilizer will ensure that the engine cannot
be started. However, if the thief physically damages
the electronics and cause the memory loss, this will
interfere with the GOST Immobilizer operation.
“
GOST Immobilizer " is an Electronic Anti-Theft
Device
–
designed to protect the engine from being
started or stolen by a thief. The Patented Technology
prevents the engine from starting, but, maintains the
computer, radio and clock settings while it is in the
LOCK or ARM position.
CAUTION: Do not Crank the Engine when the "
GOST Immobilizer
”
, is in the LOCK or ARM position,
so as to avoid loss of computer, radio and clock
settings.
Note: If you do happen to crank the engine or want
to test the
“
GOST Immobilizer", please understand
that you will need to re-set any computer, radio or
clock settings.
Disconnecting the GOST Immobilizer
1.
First remove the negative cable of your battery
from the negative post.
2.
Disconnect the GOST Immobilizer positive red
cable from your batteries positive post
3.
Disconnect the positive cable coming from the
engine, to the GOST Immobilizer.
4.
Reconnect the positive cable from the engine
to the positive post on the battery.
5.
Finally, attach the negative cable of your
engine to negative post on the battery again.
12 month Warranty
GOST Immobilizer comes with a 12 month warranty against
defects or failure within one year of purchase. Warranty
does not cover failures due to accidental damage, if
submerged in water, misuse or failure to follow installation
instructions. If the unit is open without the manufacturer
’
s
assistance, it will completely void the warranty.
Warranty claims MUST accompany original bill of sale or
invoice, clearly showing date of purchase , with model and
serial number of the unit, PLUS the main unit with all its parts
and accessories.
NOTE: The changes or modifications not expressly approved by the
party responsible for compliance could void the user
’
s authority to
operate the equipment. To comply with the FCC RF exposure
compliance requirements, the device and its antenna must not be co-
located or operating to conjunction with any other antenna or
transmitter. This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1) this device
may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause
undesired operation.
