6
•
Using the Pizza Conversion
Pizza Conversion Operator Manual
Normal Operation
The goal is to get the stainless steel of Pizza Conversion as hot as possible, at least 500
°
F, so the radiant heat
will cook the top of the pizza. Follow these steps to use the Professional Pizza Conversion with your Paradise
Grilling systems grill:
1.
Clean the grill grates according to the grill’s Operator Manual
2.
Place the Professional Pizza Conversion on the grates, centered over either of the middle burners
3.
Light the burners per the grill’s operator Manual
4.
Turn the burners to HIGH and close the grill lid
5.
Allow the grill to heat up until the grill’s thermometer indicates 500
°
6.
Check the Pizza Conversion thermometer; keep heating until the temperature is greater than 500
°
F
7.
Wearing gloves and or using utensils, carefully place the pizza stone onto the grate in the center of
the Pizza Conversion and push it all the way in
8.
Allow the stone to heat for 10 minutes:
•
The stone temperature should be 100-200
°
F less than the pizza conversion thermometer
•
Use a digital infrared thermometer to test temperature, OR
•
At proper temperature, a few water droplets on the stone should “dance” before evaporating
Congratulations! You are now ready to cook pizza!
