GSL-SB2B Double Side Burner Operator Manual
Double Side Burner Assembly
•
19
Install the Double Side Burner
Complete this procedure to install the burner unit into the island:
1.
Use the two provided screws to attach the cover handle to the cover:
Figure 10 Remove Burner unit Plate
2.
Carefully snip the zip ties around the electrical cable inside the left rear corner of the burner unit
(Figure 11); DO NOT CUT THE WIRE
Figure 11 Electrical Cable
3.
Attach the gas supply line to the burner unit per Connect Burner Unit to Gas Source procedure on
page 23
The burner unit is heavy and requires two people to lift, and to avoid
injury and damage to the burner unit and island.
Pinch Hazard! Do not allow fingers to become pinched between
burner unit and countertop.
