Paradise Datacom HOT TUB, Инструкция по эксплуатации

Страница: 4 / 16

4
Installation
An electrician:
You will need an electrician to wire up a 15amp or 10amp outdoor power supply.
Only one power point is required. The pump, touch-pad, LED light, ozonator
and heater are all connected into the blue SPANET controller unit which comes
with a 5m power cable and plug attached.
Plumbing:
Our tubs are designed for easy self-installation with simple to follow
instructions. No plumbing or gluing is required as everything comes glued
together and water tested.
A basic DIY skill is only required. No technical pool installer is required unless
you feel you can’t install yourself in which case you can contact your local pool
shop for assistance.
Heater, controller & touch-pad
Your hot tub comes with the latest in SPANET pump technology and with a
user-friendly touch-pad with many advanced features.
Refer to the separate SPANET touch-pad controller manual regarding the
operating instructions.
Choose which orientation of the touch-pad you prefer (facing inwards or
outwards) then peel the backing off to allow the touch-pad to be fixed into your
desired position.