Paradigma SCB-09, Руководство пользователя и инструкция по установке

Страница: 8 / 64

Tab.6 Counters at user / basic installer level
Code Display text Description Range Subme­
nu
AC001 Hours on mains Number of hours that the appliance has
been on mains power
0 Hours - 4294967295 Hours System
Function
ality
4.3.2 SCB-09 expansion PCB signals
Tab.7 Navigation for user / basic installer level
Display Level Menu path
User
> SCB-09
Basic installer
> Installation Setup > SCB-09 > Submenu
(1)
> Parameters, counters, signals > Signals
(1) See the column "Submenu" in the following table for the correct navigation. The signals are grouped in specific functionalities.
Tab.8 Signals at user / basic installer level
Code Display text Description Range Subme­
nu
AM004 Blocking code The current blocking code 0 - 255 System
Function
ality
AM005 Locking code The currently active locking code. 0 - 255 System
Function
ality
AM012 Status Appliance Current main status of the appliance.
See
Status and sub-status,
page 8
System
Function
ality
AM014 Sub status
Appliance
Current sub status of the appliance.
See
Status and sub-status,
page 8
System
Function
ality
4.3.3 Status and sub-status
Tab.9 AM012 - Status
Rang
e
Status Explanation
0 Standby The appliance is in standby mode.
1 Heat Demand A heat demand is active.
2 Generator start The appliance starts.
3 Generator CH The appliance is active for central heating.
4 Generator DHW The appliance is active for domestic hot water.
5 Generator stop The appliance has stopped.
6 Pump Post Run The pump is active after the appliance stopped.
8 Controlled Stop The appliance does not start because the starting
conditions are not met.
9 Blocking Mode A blocking mode is active.
10 Locking Mode A locking mode is active.
11 Load test min Low load test mode for central heating is active.
12 Load test CH max Full load test mode for central heating is active.
13 Load test DHW max Full load test mode for domestic hot water is active.
en
4 Settings
8
THIT9650_V1.0_0221 (7710388-03)