Paradigm X-500, Руководство пользователя, Страница: 3 / 21

2
Do not install this equipment in a confined space such as a case
or similar. Install it away from direct sunlight, heat sources, vibra-
tion, dust, moisture, and/or cold.
Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or per-
sonal injury.
Install this unit near the AC outlet and where the AC power plug
can be reached easily.
This unit is not disconnected from the AC power source when it is
turned off. This state is called the standby mode. In this state, this
unit is designed to consume a very small quantity of power.
CAUTION: Top surface can become hot.
CAUTION: These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the oper-
ating instructions unless you are qualified to do so.
CAUTION: Changes or modifications to this equipment not ex-
pressly approved by Paradigm for compliance could void the us-
er’s authority to operate this equipment.
FCC WARNING: Changes or modifications not expressly ap-
proved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and X-500.
• Connect the equipment into an outlet on a circuit different
from that to which the X-500 is connected.
• Consult the dealer or an experienced radio / TV technician
for help.
DO NOT LOCATE IN THE FOLLOWING PLACES:
To ensure long-lasting use, do not locate the unit:
• Exposed to direct sunlight.
• Near sources of heat such as heaters.
• Highly humid or poorly ventilated.
• Dusty.
• Subjected to mechanical vibrations.
• On wobbly, inclined, or otherwise unstable surfaces.
• Near windows where there is a chance of exposure to rain, etc.
• On top of an X-500 or another component which dissipates
a great deal of heat.
To ensure proper heat radiation, ensure clearance from walls and
other equipment according to the diagram.
Left: 63mm
(2.5 in) or more
Above: 15mm
(0.6 in) or more
Right: 63mm
(2.5 in) or more
POWER STEREO SUB