Paradigm Pacer2800, Руководство пользователя

Страница: 12 / 28

Maintenance
CENTERING RUNNING BELT
TREADMILL LUBRICATION
Lubricating under the treadbelt will ensure superior performance and extend its life expectancy.
After the first 25 hours of use (2-3 months) apply one half bottle of lubricant.
Every 50 hours of use (5-8 months) apply one half bottle of lubricant.
HOW TO CHECK TREADBELT FOR PROPER LUBRICATION
Lift one side of the treadbelt and feel the top surface of the treadboard.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply one packet of lubricant or half of the bottle of lubricant.
HOW TO APPLY LUBRICANT
Lift one side of treadbelt.
Pour one half of the lubricant bottle
under the center of the treadbelt on the top
surface of the treadboard.
Walk on the treadmill at a slow speed for 3 to 5
minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate treadboard. Any
excess lubricant that comes out should be wiped
off.
IMPORTANT: ONLY USE HALF THE BOTTLE OF LUBRICANT PER APPLICATION
LUBRICATION SCHEDULE.
Start the treadmill without anyone on the running belt, press
speed up bottom until speed reached 16kph.
If toward the left side of the deck
Using an Allen wrench, turn the left adjustment bolt 1/8 turn in
a clockwise direction and the right adjustment bolt counter
clockwise 1/8.
If toward the right side of the deck
Using an Allen wrench, turn the right adjustment bolt 1/8 turn
in a clockwise direction and the left adjustment bolt counter
clockwise 1/8.
ADJUST THE BELT TENSION
If the running belt feels as though it is “slipping” or hesitating when you plant your foot during a run,
the tension on the running belt may have to be increased. To increase the tension of the running belt,
turn both left and right adjustment bolts clockwise evenly.
Call for service 07 3272 7010
12