Paradigm iDEA+, Руководство пользователя

Страница: 38 / 61

3.7.2.2.3 PPPoE
PPPoE:
When
PPPoE Mode
is selected from the WAN Access Type drop down manual, the following screen
display. Point-to-Point Protocol (PPP) is a method of establishing a network connection between network
hosts. PPPoE, also known as RFC 2516, adapts PPP to work over Ethernet. PPPoE provides a mechanism
for authenticating users by providing User Name and Password fields and it is a connection type provided by
many ISP or Telecom.
Fields in this page:
Field Description
WAN Access Type Choose PPPoE mode
User Name Your ISP Account ID. Check your ISP for details.
Password Your ISP Account Password. Check your ISP for details.
Service Name Your ISP Service Name. Check your ISP for details.
Connection Type There are Continuous, connect on Demand and Manual in connection
type.
Idle Time Specifies that PPPoE connection should disconnect if the link has no
activity detected for n minutes. This field is used in conjunction with the
On-Demand feature and is enabled in connection type. To ensure that
the link is always active, enter a 0 in this field.
MTU Size Maximum Transmission Unit. The largest size packet that can be sent by
the modem. If the network stack of any packet is larger than the MTU
value, then the packet will be fragmented before the transmission.
Default is 1452 bytes.
Attain DNS Automatically Attain DNS server IP address from ISP automatically.
iDEA
+
Docking Station 33