FIGURE 5
STEP 5
• Remove two 3/8 X 2” BOLTS, four 3/8” WASHERS, two 2-7/8” L-BRACKETS, two 4-1/2” PULLEYS, and two 3/8” LOCK NUTS from
the upper flats on the BASE as shown in FIGURE 5.
FIGURE 6
STEP 6
•
SECURELY
assemble the previously removed 4-1/2” PULLEYS to the BASE using two 3/8 X 2-1/2” BOLTS (1), four previously
removed 3/8” WASHERS, two previously removed 2-7/8” L-BRACKETS, two SWIVEL SNAPS (3), two 3/8” HEX NUTS (8), and two
previously removed 3/8” LOCK NUTS. See FIGURE 6.
37
BASE
3/8 X 2-1/2” 1
BASE
3/8” WASHER
4-1/2” PULLEY
3/8” WASHER
3/8” LOCK NUT
2-7/8”
L-BRACKET
3/8” X 2” BOLT
3/8” WASHER
4-1/2” PULLEY
2-7/8” L-BRACKET
3
8 HEX NUT
3/8” LOCK NUT
3/8” WASHER
