Para systems EN400, Руководство пользователя

Страница: 15 / 23

14
English
BATTERY REPLACEMENT PROCEDURE
PLEASE READ THE CAUTIONS AND WARNINGS BEFORE ATTEMPTING
TO REPLACE THE BATTERIES
1. Turn off the equipment that is plugged into the output receptacles of the
UPS.
2. Press the On/Off Button for at least one second then release the On/Off
Button to turn the UPS off.
3. Unplug the UPS's power cord from the AC wall outlet.
4. Unplug the equipment from the output receptacles of the UPS.
5. Unplug the computer interface cable from the the UPS.
6. Turn the UPS over and lay it face down.
7. Remove the battery compartment retaining screws. (FIG. 1)
8. Remove the battery compartment cover. (FIG. 2)
9. Grasp the battery and gently pull it out far enough to disconnect the battery
wires.
10. Disconnect the battery positive (Red) wire. (FIG. 3)
11. Disconnect the battery negative (Black) wire. (FIG. 3)
NOTE: DO NOT short the battery wires together.
12. Remove the battery and set aside.
NOTE: Orient the new battery in the same direction as the original battery.
13. Place the new battery close enough to connect the battery wires.
14. Connect the battery negative (Black) wire to the battery negative terminal.
15. Connect the battery positive (Red) wire to the battery positive terminal.
NOTE: Some sparking might occur, this is normal.
16. Install the new battery into the UPS.
17. Re-install the battery compartment cover onto the UPS.
WARNING: DO NOT pinch the battery wires with battery compartment cover.
Battery
Qty/Rating
EN600
1-12V5.0Ah
Model #
Replace batteries with the same number and type as originally
installed in the UPS. These batteries have pressure operated vents.
These UPSs contain sealed non-spillable maintenance-free lead
acid batteries. CAUTION:
CSB
Part #
Ritar Power
Part #
HR1221W
RT1250
EN400
1-12V4.5Ah
GP1245
RT1245
Typical Recharge Time: 8-hours from total discharge.
Typical Battery Life: 2-5 years, depending on discharge cycles and ambient
temperature.