PAR TAPS Burj Handshower, Руководство по установке, Страница: 2 / 8

Important Information
Mounting Guide
• Please read these instructions completely.
• All instructions serve as a guide only and must be installed by a licensed plumber in
accordance with AS/NZS 3500.1. Installation carried out by unlicensed individuals will void
all warranties.
• Supply lines must be flushed prior to installation to remove any foreign matter.
• All products are suitable for use with most instantaneous hot water heaters, however are not
compatible with gravity-fed water systems.
• Please check all measurements prior to drilling holes in
Prior to Installation:
If a bracket is supplied, position it on the wall in
the desired mounting location, preferably where
a wall noggin is located
Please Note: If there is no mounting bracket supplied for your accessory, skip to Step 2.
Drill the mounting holes to suit the plastic plugs
provided
Mark the intended mounting points. If a bracket
is supplied, do so using the bracket holes as a
template. Ensure it is positioned straight and level
on the wall.
Tap the plastic plugs into place and fit the
accessory bracket over them through the
corresponding holes.
Install screws through the plastic plugs into the
wall. where appropriate, fit locking rings or collars
over the plastic plugs before installing screws.
Install and tighten any grub screws supplied.
1.
3.
2.
4.
5.