Brief description
The Paperfox EEVV-3 electric edge protector cutter is designed for cutting cardboard edge
protector profiles with the properties described in the following section. The device can cut the
protectors automatically when the photosensor starts the cutting automatically, or the cutting can
be started with passing a foot pedal.
Technical parameters
Safety instructions
Please read the operating instructions before you use the Paperfox EEVV-3 electric edge
protector cutter to prevent accidents and ensure the trouble-free operation.
•
The Paperfox EEVV-3 electric edge protector cutter may not be operated by anyone who does
not read or does not fully understand the operating manual.
•
The device may not be used in wet or explosive environment.
•
Always use a proper lighting.
•
To ensure the easy unplugging use a socket in a height 0,6 and 1,9m.
•
Use a proper socket with a safety ground.
•
Never change the fuse to any other type as the designated value.
•
Repairs should be carried out by qualified persons using original parts.
•
The device uses sharp knives. Be careful when you replace the knives.
•
Do not remove the safety cover.
Dimensions:
L=40cm W=26cm H125cm
Weight:
35 kgs
Voltage:
230V 50Hz
Power consumption:
400W
Operation method:
Manual
Max. edge protector cardboard size:
80x80mm
Max. cardboard thickness:
8mm
Knife type:
Olfa LB-SOL-10, Olfa LB-10 or similar 18
x100mm blade
PAPERFOX EEVV-3 ELECTRIC EDGE PROTECTOR CUTTER
3
