INSTRUCTIONS WHEN RECEIVING THE THOR202 ENGINE
1
DON’T FORGET TO
ATTACH THE SECURITY
STRAP OF THE AIRBOX
TO THE ENGINE SUPPORT
PLATE (fig 6)
(fig
01
)
(fig
02
)
(fig
03
)
(fig
05
)
(fig
04
)
(fig
06
)
When receiving your paramotor with the
Thor202 engine you will have to reinstall
the radiator on his support tight in the
6mm bolt
(fig 1)
.
Then you will have to connect the long
tube to the pump
(fig 2)
and the other
one on the Top of the head cylinder
(fig
3)
: take care not to loose or damaged the
O ring gasket
(fig 4)
.
Everything is connected so now you have
to fill the circuit with aluminum radiator
liquid which can be found in gas station
and motorbike shops.
The amount is approximately 0,8 L.
You will have to fill until 2cm from the
aluminium grey part, 4cm from the top
(fig 5)
After starting the radiator, open the bottle
to control the cooling liquid level.
