Paolo Severin Fokker E.I Eindecker, Инструкция по сборке

Страница: 20 / 32

1 , 5 m m
ø 8 m m
R O D
20
J
K
12) Glue the rear ends of the ribs onto the cap-strips.
13) Position and glue the rear spar as shown in the photo J.
WARNING: Ensure that both fork ends are perfectly aligned at 1.5
mm distance from the root rib. Use a 8 mm diameter rod to align
as shown in the drawing K.
14) Glue in place the birch plywood root rib as shown in the photo
L and place the front spar against the rib without gluing it.
15) Mount the two compression members as shown in photo M.