Paoli TOOLKIT, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 20

ENGLISH
OPERATING AND MAINTENANCE MANUAL
11
OPERATON INSTRUCTION
INSTALLING OR REMOVING BATTERY PACK
INSTALLING OR REMOVING BATTERY PACK
1. Always switch off the machine before insertion or removal
of the battery pack.
2. To remove the battery pack, push the button on the
battery pack and pull the tool unit from the battery pack
in the direction.
3. To insert the battery pack, align the tool unit slides with
the battery pack sliding groove and push the tool unit into
place. The tool unit can be slide into battery pack in two
directions.
4. Do not force the battery pack in sliding it into tool unit.
If the battery pack does not slide in easily, it is not being
inserted correctly.
1. Plug the fast charger into the power source.
2. Slide the battery pack into the charger as the arrow
direction shown on the charger.
3. Push the battery pack into place and make sure the red
light on the charger is "ON". The battery pack is now
starting the charging cycle.
4. After finish the charging cycle, the light will turn into
green. The battery pack is now ready for use.
5. Your new battery pack is not charged. You need to
charge it before use.
6. If you try to charge a battery pack from a just-operated
machine, sometimes the charging light will not come on.
If this occurs, let the battery pack cool for a while then
re-insert it and try to charge again.
7. When you charge a new battery pack or a battery pack
which has not been used for a long period, it may not
accept a full charge. This is a normal condition and does
not indicate a problem. You can recharge the battery
pack fully after discharging it completely a couple of
times.
8. Unplug the charger from the power source after finish
the charge.
9. Please remove the battery from the unplugged charger
for storage.