Pantum P3010 SERIES, Руководство пользователя

Страница: 100 / 108

90
11.3. Common Troubleshooting
11.3.1. Common Problems
Problem Cause Solution
Problems with
the Printer
The printer does
not work The cable between the computer and
the printer is not connected properly.
Error in specifying the print port.
The printer is offline and User Guide of
Printer is checked.
The printer has not recovered from an
internal error, such as a paper jam,
paper empty, etc.
Driver program of printer is not
installed correctly.
Disconnect and then reconnect the
printer cable.
Check the Windows printer settings to
ensure that the print job has been sent
to the correct port. If the computer has
more than one port, make sure that the
printer is connected to the correct port.
Make sure that the printer is in the
normal online status.
Please eliminate errors so that the
printer can recover to its normal state.
Unload and reinstall the driver program
of printer.
Problems with
Paper Handling
Paper feed
failure The print media has been loaded
incorrectly.
The print media is out of the supported
media range.
The feed roller is dirty.
Too many papers in paper tray.
Please install printing medium correctly;
please print with manual feed tray if
special printing medium is used to print.
Please use the print media within the
specification range.
Clean the feed roller.
Take the excessive papers out from
paper tray; please print with manual feed
tray if special printing medium is used to
print.
Paper Jam Too many papers in paper tray.
The print media is out of the supported
media range.
There is foreign matter in the paper
path.
The feed roller is dirty.
Internal parts failure.
Take the excessive papers out from
paper tray; please print with manual feed
tray if special printing medium is used to
print.
Make sure to use the paper that meets
specifications. please print with manual
feed tray if special printing medium is
used to print.
Clean the paper path.
Clean the feed roller.
Print multipage
feed Excessive static electricity on the print
media.
The print media is damp and is
sticking together.
Internal parts failure.
Separate the print media to eliminate
some static electricity. It is suggested
that you use the recommended print
media.
Separate the print media or use better
quality and dry print media.