Pantum BP5100DN Series, Руководство пользователя

Страница: 63 / 136

52
Note
：
• Please refer to
Chapter 1.5 for how to cancel and disconnect WiFi connection.
• After successful WiFi Protected Setup (WPS) connection, please install a driver if you
want to print via wireless network.
5.1.3. How to disable the WiFi network connected
Connect the wireless network in infrastructure mode by the steps above. If connected, the WiFi
light on the control panel is normally on. Press and hold this button for more than 2s to disconnect
from WiFi network (WiFi light will be off).
5.2. WiFi Direct mode
You can connect wireless client (including the computer and mobile device with wireless network
feature) to wireless network printer without using the access point (wireless router).
5.2.1. Preliminary preparations
1. Printer with the WiFi Direct feature.
2. Wireless client (including computer and mobile device with wireless network feature).
5.2.2. WiFi Direct connection
1. Turn on printer power.
2. Before connecting to printer hotspot, turn on direct WiFi connection of the printer by short
pressing "WiFi" button on the panel.
Note
：
• Short press "WiFi" button on the printer panel to automatically print out "Mobile Device
WiFi Connection Wizard" page for WiFi connection by mobile devices.
3. Press the “Menu key” – “Network Info” – “WiFi dir. Info” on control panel of printer to view "SSID"
and "Password".
4. Turn on the computer or mobile device with wireless network function; select the SSID of WiFi
Direct and input password to connect.
5.2.3. How to disable the WiFi Direct
1. Turn on printer power.
2. Press "Menu", "Network Set", "WiFi Direct" and then "Off" on the printer's control panel to
disable WiFi Direct.
5.3. How to switch wireless frequency
If you need to switch the wireless frequency, you can do it through the following steps:
1. Turn on the printer.
2. Press the “Menu key” - “Network Settings” - “Wireless Network Setup” - “Wireless Frequency
Setting” on control panel of printer to switch the wireless frequency.You can also switch the
wireless frequency by accessing the embedded Web server, please refer to
“Wireless setup”
.