![panthera X Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/panthera/x/x_user-manual_752443015.webp)
15
art.nr
. 8822150 Rev 2021-01, Publ. 2021-03-23
Panthera
AB reserves the right to make technical changes if required
SETTINGS
7) Adjusting the high brake
Please note
! The effectiveness of the brakes is affected when the air pressure
drops, the tyres become worn or when changing to a different type of tyre. As a result, the
brakes’ settings should be checked from time to time.
Adjusting the X one-hand brake
(Fig. 13)
One-arm brake X is activated by pulling lever (1) backwards until stop. Then both rear
wheel are locked at the same time.
1) Use a block key 12 mm to loosen the one-hand brake’s clamping bolts on both sides.
2) You will now be able to push the brake forwards and backwards along the chassis’
seat tubing. Adjust the brake so that it presses around 4 mm into the tyre while in locked
position.
3) Ensure that the brakes are in the same forward position on both sides of the chair.
4) Tighten the clamping bolt (1) using block key 12 mm.
Fig. 13