2) Place and hold the part of the attachment (2) around the
chassis tube.
3) Put the other part (3) over the first.
4) Place the previously mounted parts on the attachment.
The long screws should be on the outside and the chamfer
on part 4 should face out from the chassis, towards the rear
wheels.
5) Tighten the screws slightly with allen key 4 mm.
6) Enter the rear axle into the attachment. Make sure the
chamfer at the end of the rear axle lines up with the chamfer
on part 4.
7) Tighten the screws slightly just to keep the rear axle in posi-
tion.