Panther S-TYPE DOLLY, Руководство пользователя

Страница: 24 / 64

24
How to make Level Calibration
To actually make a new Level Calibration you have
to press the OK button. This does a reset of the
height position.
Now first you have to drive your height manually
with the handsets‘ rocker to its‘ minimum height (up
to the end switch). After that you have to drive to
maximum height (up to the end switch). After that
your height Level Calibration is finished.
Dolly Type
The Wireless Handset was made not only for the
S-Type dolly.
If you want to use it on for example the Classic Plus
dolly you can choose that option in the next point of
the Service Menu.
By pressing the + or the - butto you can
change between different dolly types.
Level Calibration
To check the scissors-arm level position take a look at
the right bar in your screen (red marked).
When do I need to make Level Calibration?
You have to make Level Calibration only if you are
not satisfied with the accuracy of the display of your
scissor-arm position.
This can happen for example after maintenance of
your the arm.
WIRELESS HANDSET
SERVICE MENU
If the right bar shows “?“ then it means that the dolly was not yet driven to
the end switches or that the receiver board just learns the height position.