128-9104
14 of 32
14
To learn the light delay, start with all doors closed:
(1) Use the transmitter to Lock / Unlock / Lock / Unlock / Lock / Unlock / Lock, the system. The
LED turns on solid to confirm the system entered the learn mode.
(2) Immediately open and close the door of the vehicle to initiate the dome delay. The unit will
monitor the door trigger input Positive, (Purple), and Negative, (Green) when active. When
the dome light turns off, the unit will add 2 seconds then exit the learn mode.
(3) The LED will begin flashing the Armed indication indicating the unit has exited the learn
mode and is armed.
After you have confirmed the operation of the Audiovox Remote Start unit and tested all the safety
features of the system:
SECURE THE MODULE & HARNESSES
a. Mount the control module up and behind the dash securing it in place with cable
ties or screws. Be certain that the chosen mounting location will not inhibit any of the
controls of the vehicle.
b. Securely harness and tie all wiring up and away from all hot and moving parts that
they may come in contact with under the dash board or in the engine compartment
areas.
CAUTION:
Particularly avoid the area around the steering shaft and column, as wires can
wrap around these mechanisms and impair the safe operation of the vehicle.
c. Apply the Caution Labels supplied with this kit to a conspicuous area in the engine
compartment. Make sure to clean the surface before affixing the label.
d. Check the vehicle's wipers, lights, horn, etc.... to insure proper operation.
e. Replace all panels that were removed during installation, and retest the system.
f. Explain all activated features and safety systems associated with Remote Start Unit
installed to the customer.
